Realtime Recording Page; Chord/Acc Step Recording Page - Korg microARRANGER Owner's Manual

REALTIME RECORDING PAGE
While you are in Backing Sequence mode, press
RECORD, then one of the A VOLUME/VALUE but‐
tons, to access the Realtime Recording mode. The
RECORD LED turns on.
Style
This non‐editable parameter shows the selected Style.
If no Style is selected, the name will be empty. You can
select a different Style, using the STYLE section (see
"Selecting a Style" on page 26).
0...99%
This non‐editable parameters shows the remaining
recording space in memory, as a percentage.
Perf or STS (Performance or STS)
This non‐editable parameter shows the selected Perfor‐
mance or STS (depending on the last item selected). If
no Performance or STS is selected, the name will be
empty. You can select a different Performance, using
the PROGRAM/PERFORMANCE section (see "Select‐
ing a Performance" on page 25). To select one of the
four STS for the current Style, use the F‐1–F‐4 buttons.
Resol (Resolution)
Use this parameter to set the quantization during
recording. Quantization is a way of correcting timing
errors; notes played too soon or too later are moved to
the nearest axis of a rhythmic "grid", set with this
parameter, thus playing perfectly in time.
Hi No quantization applied.
(1/32)... (1/8)
Grid resolution, in musical values. For
example, when you select 1/8, all notes are
moved to the nearest 1/8 division. When
you select 1/4, all notes are moved to the
nearest 1/4 division.
Hi (no quan-
tization)
1/16
1/8
Sel.Tempo (Select Tempo)
Select this parameter to use the TEMPO/VALUE sec‐
tion to select the Tempo. When you select this parame‐
ter, the VALUE LED turns off.
Backing Sequence operating mode
Metro (Metronome)
This parameter sets the metronome mode during
recording.
Off The metronome can be heard only during
the precount.
On1 The metronome plays during recording.
Recording begins with a 1‐bar precount.
Start recording after bar ‐1.
On2 The metronome plays during recording.
Recording begins with a 2‐bar precount.
Start recording after bar ‐1.
RT/Pads
Ch/Acc
These parameters let you decide the track status during
recording.
RT/Pads: This Backing Sequence track includes the
four Realtime (Keyboard) tracks, and the four Pads.
They will be Song tracks 1–8, as in the following table:
RT/Pad track
Upper 1
Upper 2
Upper 3
Lower
Pad 1
Pad 2
Pad 3
Pad 4
Ch/Acc: This Backing Sequence track includes all Style
tracks, including recognized chords. They will be Song
tracks 9–16.
MUTE The track is muted. If this tracks has
already been recorded, it will not be heard
during recording of the other Backing
Sequence track.
PLAY The track is in play. If there are recorded
data, they will be heard during recording
of the other Backing Sequence track.
REC The track is in record. All previously
recorded data will be deleted.
CHORD/ACC STEP RECORDING PAGE
While you are in Backing Sequence mode, press
RECORD, then one of the B VOLUME/VALUE buttons,
to access the Chord/Acc Step Recording mode. The
RECORD LED turns on.
Realtime Recording page
Song track/Channel
1
2
3
4
5
6
7
8
85