Playing A Jukebox File - Korg microARRANGER Owner's Manual

74 Song Play operating mode
Tracks 9–16 page
TRACKS 9–16 PAGE
To see and edit tracks 9–16, press TRACK SELECT once
from the Tracks 1–8 page, or twice from the main page.
The TRACK SELECT LED begins flashing.
Press the TRACK SELECT button again, to go back to
the main page.
A–H (Tracks 9–16 Programs)
Name of the Programs assigned to tracks 9–16. Use
these buttons to select, mute/unmute or change the vol‐
ume of the corresponding tracks.
SONG SELECT PAGE
This page appears when you press either the A (S1:) or B
(S2:) button while you are in the main page. You can also
access the Song Select page by pressing PAGE +.
Press EXIT (or PAGE‐) to go back to the main page of the
Song Play operating mode, without selecting a Song.
While in this page, select a Song for the selected
Sequencer, or a Jukebox file for Sequencer 1.
Note: There is a separate working directory for each onboard
sequencer.
A–C (File, folder)
Move the ".MID", ".KAR" or ".JBX" file, or folder, to be
selected to the first line of the display. To select a file,
press the F‐2 (SELECT) button. To open a folder, press
the F‐3 (OPEN) button.
The " " symbol identifies a folder.
E–F (Scroll Up)
Scroll the list up. Keep SHIFT pressed and press one of
these buttons to jump to the previous alphabetical section.
G–H (Scroll Down)
Scroll the list down. Keep SHIFT pressed and press one
of these buttons to jump to the next alphabetical section.
F-1 (SD)
Press this button after replacing a card in the card slot.
The new card will be read, and the file list shown on
the display will be updated.
F-2 (SELECT)
Selects the item on the first line in the display (Song or
Jukebox file). If a Song is already playing, it stops, and
the new Song starts playing. You are returned to the
Main page.
F-3 (OPEN)
Opens the selected folder (item whose name begins
with " ").
F-4 (CLOSE)
Closes the current folder, returning to the parent
("upper") folder.
THE LYRICS PAGE
This page shows the lyrics and chord abbreviations
included in the midifile (if any).
To access this page, select the Lyrics command, or press
PAGE+ twice, from the main page of the Song Play
mode (see "Main page" on page 73).
Chords
Exit from this display, and go back to the main page of
the Song Play mode, by pressing the EXIT button.
While the Song is playing, the text flows in the display,
and the chord abbreviations (if any) will appear on the
chords area of the display. The lyrics at the current
position are underlined:
A (1)
Press this button pair to show Lyrics and Chords of
Sequencer 1.
B (2)
Press this button pair to show Lyrics and Chords of
Sequencer 2.

PLAYING A JUKEBOX FILE

With Sequencer 1, you can select a Jukebox file (a file
with the ".JBX" extension) instead of a single Song.