62
Style Record mode
Page 1 - Edit: Quantize
PAGE 1 - EDIT: QUANTIZE
The quantize function may be used to correct any
rhythm error after recording, or to give the pattern a
"groovy" feeling.
After setting the various parameters, press ENTER to
execute. The "Are you sure?" message will appear.
Press ENTER to confirm, EXIT to abort.
E/CV (Style Element/Chord Variation)
(Non editable) These read‐only parameters show which
Style Element and Chord Variation are currently
selected for editing. See the Main page "E (Style Ele‐
ment)" and "CV (Chord Variation)" parameters on
page 55 for information on selecting a different Style
Element and Chord Variation.
Trk (Track)
Use this parameter to select a track.
All
All tracks selected.
Drum...Acc5Selected track.
Resol (Resolution)
This parameter sets the quantization after recording.
For example, when you select 1/8a, all notes are moved
to the nearest 1/8 division. When you select 1/4, all
notes are moved to the nearest 1/4 division.
No quanti-
zation
1/8
1/4
(1/32)... (1/4)
Grid resolution, in musical values. An "a"
after the value means no swing. A "b...f"
after the value means swing‐quantization.
S / E (Start/End)
Use these parameters to set the starting (S) and ending
(E) points of the range to quantize.
If a Chord Variation is four measures long, and you
want to select it all, the Start will be positioned at
1.01.000, and the End at 5.01.000.
Bottom / Top
Use these parameters to set the bottom and top of the
keyboard range to quantize. If you select the same note
as the Bottom and Top parameters, you can select a sin‐
gle percussive instrument in a Drum or Percussion track.
Note: These parameters are available only when a Drum or
Percussion track is selected.
PAGE 2 - EDIT: TRANSPOSE
In this page you can transpose the selected track(s).
Note: After transposing, please don't forget to readjust the
"Original Key/Chord" parameter in the Style Record page
(see page 56).
After setting the various parameters, press ENTER to
execute. The "Are you sure?" message will appear.
Press ENTER to confirm, EXIT to abort.
E/CV (Style Element/Chord Variation)
(Non editable) These read‐only parameters show which
Style Element and Chord Variation are currently
selected for editing. See the Main page "E (Style Ele‐
ment)" and "CV (Chord Variation)" parameters on
page 55 for information on selecting a different Style
Element and Chord Variation.
Trk (Track)
Use this parameter to select a track.
All
All tracks selected, apart for tracks set in
Drum mode (like the Drum and Percus‐
sion tracks). The whole selected Chord
Variation will be transposed.
Drum...Acc5Single selected track.
Value
Transpose value (±127 semitones).
S / E (Start/End)
Use these parameters to set the starting (S) and ending
(E) points of the range to be transposed.
If a Chord Variation is four measures long, and you
want to select it all, the Start will be positioned at
1.01.000, and the End at 5.01.000.
Bottom / Top
Use these parameters to set the bottom and top of the
keyboard range to be transposed. If you select the same
note as the Bottom and Top parameters, you can select
a single percussive instrument in a Drum or Percussion
track. Since in a Drum Kit each instrument is assigned
to a different note of the scale, transposing a percussive
instrument means assigning the part to a different
instrument.
Note: These parameters are available only when a Drum or
Percussion track is selected.