Utilities 1; Page 8 ‐ Utilities 1 - Korg microARRANGER Owner's Manual

PAGE 8 - UTILITIES 1
This page includes a set of card utilities.
Press SD CARD and use the MENU or PAGE buttons
to reach this page.
SD info
Select this command to see the name of the inserted
card, and the free space on it.
If pressed without a card inserted, the "No card /
Unformatted Press Exit" warning appears. Please,
insert a card and press ENTER (or EXIT to abort).
SSD info
Select this command to see the free space on the Solid
State Disk (SSD), used as the system's internal memory.
Save OS
This command starts an Operating System backup, to
save a copy of the instrument's Operating System on a
card.
Note: Should you not do a back‐up and your internal data is
changed, you can download the data from
www.korgpa.com/, or ask your local KORG dealer.
1. Select the Save OS command.
2. Insert a card and press ENTER. The following files
are created on the card:
• BPaMAR1.SYS
• NBPaMAR1.SYS
• OSPaMAR1.LZX
If the card is not formatted, microARRANGER
asks if you want to format it:
Keep SHIFT pressed, and press ENTER to format
the card.
Backup Data
This command starts a backup of all internal factory
data (Styles, Programs, Performances...) excluding the
Operating System itself.
Note: Should you not do a back‐up and your internal data is
changed, you can download the data from
www.korgpa.com/, or ask your local KORG dealer.
1. Select the Backup Data command.
2. The "Are you sure?" message appears. Press
ENTER to continue, EXIT to abort.
If the card is not formatted, microARRANGER
asks if you want to format it:
Keep SHIFT pressed, and press ENTER to format
the card.
Restore Data
This command restores the backup of the internal fac‐
tory data, executed with the "Backup Data" command.
Note: Should your Factory Data card become corrupt, you
can download the data from http://www.korgpa.com/, or ask
your local KORG dealer.
Warning: Don't play on the keyboard while restoring data,
and stay in the Card mode. Wait until the "Wait" message
disappears, and the WRITE/CARD IN USE LED turns off.
http://
1. Prepare a card containing the Backup folder and
insert it into the drive.
2. Select this command.
3. The "Are you sure?" message appears. Press
ENTER to continue, EXIT to abort.
4. Wait until the backup card has been read.
5. When the Wait message has disappeared, and the
WRITE/CARD IN USE LED has turned off, turn
the instrument off, then on again.
Note: At the end of a Restore Data operation, the "Some files
missing" error message may appear. This is due to the lack of
Performance banks 11–20 on older versions of the operating
system of Pa80, whose data you are probably reading. How‐
ever, this is not a problem. Press EXIT to close the message
Card Edit environment
Page 8 - Utilities 1
141
http://