Korg microARRANGER Owner's Manual page 136

134 Card Edit environment
Page 1 - Load
Loading a single bank
You can load a single bank of User data (User Pro‐
grams, User Styles, Performances) with a single opera‐
tion. A bank corresponds to a STYLE or PROGRAM/
PERFORMANCE button.
1. Insert the source card into the card slot.
2. Press F‐1 to scan the card and show the file list.
3. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to select the ".SET" folder con‐
taining the data you wish to load.
Move the folder to the first line of the display. If
the folder you are looking for is in another folder,
use the F‐3 (OPEN) button to open it. Use the F‐4
(CLOSE) button to go back to the parent folder.
4. Press F‐3 (OPEN) to open the ".SET" folder. A list
of User data appears (Global, Performance, Pro‐
gram, Style).
5. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the data type you are
looking for to the first line of the display.
6. Press F‐3 (OPEN) to open the selected folder. A list
of User banks appears.
7. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the desired bank to the
first line of the display.
8. Press F‐2 (LOAD) to confirm the file selection. The
list of User banks in memory appears.
In the page above, the previously selected Style
bank will be loaded into the bank 1 (USER1 but‐
ton) in memory. The existing Styles in memory will
be deleted and overwritten.
9. Scroll the available locations in memory, using the
E–H (Scroll) buttons (or the TEMPO/VALUE con‐
trols).
10. When the target bank is selected (i.e., it is in the
first line of the display), press F‐2 (LOAD) to load
the bank. The "Are you sure message" will appear.
Press ENTER to confirm, or EXIT to abort.
Warning: After confirming, all User data contained in
the bank in memory is deleted.
When the operation is completed (the "Wait" indi‐
cator disappears), the source page comes back in
the display, and you may perform further loading
operations.
Loading a single item
You can load a single User item (i.e., a single User Pro‐
gram, a single User Style, or a single Performance) with
a single operation.
1. Insert the source card into the card slot.
2. Press F‐1 to scan the card and show the file list.
3. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to select the ".SET" folder con‐
taining the item you wish to load.
Move the folder to the first line of the display. If
the folder you are looking for is in another folder,
use the F‐3 (OPEN) button to open it. Use the F‐4
(CLOSE) button to go back to the parent folder.
4. Press F‐3 (OPEN) to open the ".SET" folder. A list
of User data appears (Global, Performance, Pro‐
gram, Style).
5. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the data type you are
looking for to the first line of the display.
6. Press F‐3 (OPEN) to open the selected folder. A list
of User banks appears.
7. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the desired bank to the
first line of the display.