Mixer: Volume; Mixer: Pan; Mixer: Fx Send A/B - Korg microARRANGER Owner's Manual

76 Song Play operating mode
Page 1 - Mixer: Volume
PAGE 1 - MIXER: VOLUME
Here you can adjust the volume for each of the 16
sequencer tracks. Press both VOLUME/VALUE button
to mute/unmute the corresponding track.
A muted track remains muted even when selecting a
different Song.
Use the TRACK SELECT button to switch between
Song tracks 1–8, Song tracks 9–16, and back again.
PAGE 2 - MIXER: PAN
Here you can adjust the pan for each Song track.
Use the TRACK SELECT button to switch between
Song tracks 1–8, Song tracks 9–16, and back again.
Pan
‐64 Hard Left.
+00 Center.
+63 Hard Right.
Off The direct (uneffected) signal does not go
to the outputs; only the FX signal is heard
for this track.
PAGE 3 - MIXER: FX SEND A/B
This page lets you set the level of the track's direct
(uneffected) signal going to the A and B Internal FX
processors (usually assigned to Sequencer 1).
Use the TRACK SELECT button to switch from tracks
1–8 to tracks 9–16.
Note: When playing back a Song that makes use of all four
effects (A–D), you can't edit any effect parameter. These
parameters appear greyed out in the display.