Korg microARRANGER Owner's Manual page 238

236 Error messages & Troubleshooting
Error messages
Jukebox list is empty
You tried to delete a Song in an empty Jukebox list, or
to save an empty Jukebox list.
Jukebox list is full
The Jukebox list already contains 127 Songs.
Not a Standard Midi File
The selected file is not a Standard MIDI File, and can‐
not be played back. Select a ".MID" or ".KAR" file.
microARRANGER can play back Standard MIDI Files
in 0‐ and 1‐format.
Standard Midi File format 2
You have tried to read a Format 2 Standard MIDI File.
microARRANGER can't play this kind of file. Select a
Standard MIDI Files in 0‐ and 1‐format.
Program
Overwrite Program? (Enter/Exit)
You are trying to store a Program to a memory location
already occupied by a Program. Press ENTER to over‐
write it, or EXIT to abort.
Card mode
Can't Read Card! (Press Exit)
The card is probably damaged. Try again. If the mes‐
sage appears again, try with a different card.
Can't Read File! (Press Exit)
The file you are trying to load, copy, erase or rename is
damaged, or has a null size (0 kb), thus can't be read.
This message during a New Dir operation means there
are problems on the card. Try loading the file from a
different card.
Copy Failed! (Press Exit)
An error occurred during Copy. Copy operation
aborted.
Copy: Invalid Destination (Press Exit)
You tried to copy an ordinary file or folder into a
".SET" folder.
Corrupted Style Perf. Save it again
The Style Performance is damaged. Save it again by
pressing WRITE, and selecting the "Current Style"
option.
Delete all data. Continue? (Enter/Exit)
Formatting will delete all data on the card you are
ready to format. Be sure you have a copy of all data you
wish to preserve.
Delete Destin. Files Failed! (Press Exit)
The file you were trying to overwrite could not be
deleted.
Destination File Exists (Press Exit)
The file you are trying to copy already exists on target.
Directory Full (Press Exit)
You reached the maximum folder number for the root
of the selected card. Delete some files, or replace the
card.
Directory Not Empty (Press Exit)
You were trying to delete a directory still containing
files. Delete these files, then delete the directory.
Directory not found (Press Exit)
The directory is not in the current card. The card has
probably been replaced before finishing the card opera‐
tion. Insert the card again, and try again.
Card Full (Press Exit)
The selected medium (card) is full. Delete files you are
not interested to keep, or replace the card with an
empty one. Then, try again.
Card not empty! (Sh+Enter to Format)
During a Backup, you inserted a card containing some
data. Please replace it with an empty one, or press
SHIFT+ENTER to start formatting the card.
Card write-protected
The card is write‐protected. Move the protection tab to
close the hole, and try again. Be sure there aren't data
you don't want to overwrite. Otherwise, replace the
card with an empty one.
Erase Failed! (Press Exit)
An error occurred during Erase. Erase operation
aborted.
Error while converting (Press Exit)
While trying to load Korg i‐series data, some errors
occurred. The original file is probably corrupted, or its
structure is too different from microARRANGER or Pa‐
series data.
Error while formatting medium
An error was reported when formatting the medium
(card). The format procedure has been aborted. Try
again. If formatting a card, replace the card and try
again.
Error while Writing! (Press Exit)
An error was reported while writing on the medium
(card). The procedure has been canceled. Select a differ‐
ent medium, and try again.
Existing Files Not Copied (Press Exit)
After a Copy procedure (no Overwrite selected), all
files sharing the same name have not been copied.
Factory Styles Protected! (Press Exit)
The ".SET" file you just loaded included some banks of
Factory Styles. Since the Factory Style Protect flag was
switched on, Factory Style banks were not loaded. (See
"Factory Style Protect" on page 142).
Fast Format Failed. Full Format? (Enter/Exit)
The Fast Format procedure failed. Press ENTER to go
on with a Full Format procedure (slower).
File is protected
You have tried to write over a read‐only or system file.
microARRANGER can't write over this kind of files.
Should you need to write over one of these file, use a
personal computer to change the file's properties, then
try again. Read your computer's user's manual.
File/Dir Already Existing (Press Exit)
During a Rename or New Dir operation, you were try‐
ing to use an existing name. Use a different name.
File in Use (Press Exit)
The file you tried to delete is in use by another proce‐
dure. Wait for the procedure to be completed, then try
again.