140
Card Edit environment
Page 5 - Format
PAGE 5 - FORMAT
The Format function lets you initialize a card.
Press SD CARD and use the MENU or PAGE buttons
to reach this page.
Warning: When formatting a card, all data it contains is lost.
SD Card
This is a very fast format command. This command
rewrites just the FAT (File Allocation Table) of the card,
without actual reformatting of all sectors.
1. Insert a card into the card slot.
2.
Press F‐2 (FORMAT) to select the formatting com‐
mand.
3.
The "Delete all data?" message appears in the dis‐
play; press ENTER to confirm, EXIT to abort.
4.
The "Press F‐4 to continue" message appears in
the display; press F‐4 to confirm formatting, or
EXIT to abort.
PAGE 6 - NEW DIR
The New Dir function lets you create a new folder in
any of the cards, or inside any generic folder. You can't
create or open ".SET" folders, since these are reserved
folders, to be created with a Save operation.
Press SD CARD and use the MENU or PAGE buttons
to reach this page.
New folder procedure
1. Insert a card into the card slot.
2.
Press F‐1 to scan the card.
3.
Press one of the A VOLUME/VALUE buttons. You
are prompted to assign a name to the new folder:
Move the cursor using the DOWN/‐ and UP/+ but‐
tons. Select a character using the DIAL. Insert a
character at the cursor position by pressing the
INSERT button. Delete a character at the cursor
position by pressing the DELETE button.
4.
Press F‐2 (CREATE) to confirm. The "Are you
sure?" message appears. Press ENTER to confirm,
EXIT to abort.
PAGE 7 - RENAME
Use the Rename function to change the name of a
folder or a file. To preserve data structure consistence,
you can't rename single files inside a ".SET" folder, or
the ".SET" folder name extension.
Press SD CARD and use the MENU or PAGE buttons
to reach this page.
Rename procedure
1. Insert the card that contains the file to be renamed
into the card slot.
2.
Press F‐1 to scan the card.
3.
Move the item to rename to the first line. Then
press one of the A VOLUME/VALUE buttons. You
are prompted to change the name:
Move the cursor using the DOWN/‐ and UP/+ but‐
tons. Select a character using the DIAL. Insert a
character at the cursor position by pressing the
INSERT button. Delete a character at the cursor
position by pressing the DELETE button.
4.
Press F‐2 (RENAME) to confirm. The "Are you
sure?" message appears. Press ENTER to confirm,
EXIT to abort.