Erase Backing Sequence; Copy Backing Sequence - Korg iS35 User Manual

Reference • Backing Sequence mode
Duration
[001...100%]
This specifies the duration of the note, relative to the
length of the step.
100 Duration that coincides with the step.
Lower values Staccato (sharply detached) notes.
Higher values Legato (smooth flowing) notes.
Step recording the extra tracks
In order to step record an extra track, go to Page 2 of
the Backing Sequence mode, select the extra track
Page 3: Erase Backing Sequence
This function erases all the data from the selected
backing sequence.
Backing Sequence to be erased
Page 4: Copy Backing Sequence
This function copies the entire contents of the selected
backing sequence to another backing sequence.
Source (the selected backing
sequence)
102
(ETr1-ETr8), press REC/WRITE/LYRICS and then
START/STOP. This page will appear.
The extra track recording pages are the same as the
keyboard track recording page.
Select the backing sequence you wish to erase using
the TEMPO/VALUE buttons (or the DIAL). Press
ENTER/YES twice to erase it.
Select the target backing sequence using the TEMPO/
VALUE buttons (or the DIAL), and press ENTER/YES
twice.
Target
Note Measure
Metro Step Velocity
Position
Duration