To Perform Re-SewNg From The Start - JUKI AMS-224E/IP-410 Instruction Manual

(2) to perform re-sewing from the start
D
1 release the error.
Press RESET button
A
2 Perform thread trimming.
Press THREAD TRIM button
mng.
When thread trmmng s performed, INTERMEDIATE
PRESSER UP/DOWN button
B
button D , FEED FORWARD button
RETURN TO ORIGIN button
screen.
3 return to the origin.
When RETURN TO ORIGIN button
pop-up s closed and the sewng screen s dsplayed. Then the
needle returns to the start of sewng and the presser goes up.
C
4 Perform again the sewing work from the start.
E
By the pedal operaton, the presser can be lowered and the
start can be performed.
F
– 33 –
A to release the error.
B to perform thread trm-
C , FEED BACKWARD
E , and
F are dsplayed n the
F s pressed, the