How To EdT CombNatOn Data - JUKI AMS-224E/IP-410 Instruction Manual

(2) How to edit combination data
A
C
E
1 Display the data input screen.
Only n case of the data nput screen (pnk) t s possble to n-
put the combnaton data. In case of the sewng screen (green),
press READY swtch
(pnk).
Pattern No. has not been regstered n the ntal state, and the
first pattern selection button is displayed in the blank state.
2 Display the pattern No. selection screen.
When PATTERN SELECTION button
pattern No. selecton screen s dsplayed.
3 Select the pattern No.
D
When UP/DOWN SCROLL button
pattern No. buttons C whch have been regstered are
B
changed over n order. The contents of pattern data are ds-
played n the buttons. Here, press the pattern No. buttons you
desre to select.
4 Determine the pattern No.
When ENTER button
lection screen is closed and the selection is finished.
5 repeat steps 2 through 4 as many as the number of pat-
tern Nos. you desire to register.
When the first register is determined, the second pattern selec-
ton button
as many as the number of pattern Nos. you desre to regster.
– 55 –
to dsplay the data nput screen
D s pressed, the pattern No. se-
E s dsplayed. Repeat steps 2 through 4
A s pressed, the
B s pressed,