Operation At The Time Of X/Y Motor Position Slip; When The Error S DSplayed DurNg SewNg - JUKI AMS-224E/IP-410 Instruction Manual

2-27. operation at the time of X/Y motor position slip

When X/Y motor detects the poston slp, the error screen s dsplayed.
Tmng of error dsplay can be changed wth the selecton of memory swtch. For the detals, refer to the
Engneer's Manual.
(1) When the error is displayed during sewing
C
1 release the error.
Press RESET button
thread trmmng pop-up s dsplayed.
A
2 Perform thread trimming.
When t seems to be no problem after checkng the sttches,
depress the start pedal wthout change and re-start the sew-
ng.
If not, press THREAD TRIM button
thread trmmng.
B
When performng thread trmmng, the feed forward/back pop-
up s dsplayed.
3 adjust the presser to the re-sewing position.
Every tme FEED BACK button
er returns by one sttch. Every tme FEED FORWARD button
D s pressed, the presser moves forward by one sttch.
Move the presser up to the re-sewng poston.
In addton, when RETURN TO ORIGIN button
pressed, the pop-up s closed, the sewng screen s dsplayed,
D
and the presser returns to the sewng start poston.
E
4 re-start sewing.
When the pedal s depressed, sewng starts agan.
– 70 –
A to release the error and the
B and perform
C s pressed, the press-
E s