JUKI AMS-224E/IP-410 Instruction Manual page 79

Table of Contents

[When the 2-step stroke by means of the right pedal, the intermediate pedal and the left lever is

selected (PK-47 is used)]

Change wrng between CN1 and CN2 of the juncton cable asm. (40033875) for the PK47.

– 75 –

1 When depressng the rght pedal, the presser

stops at the ntermedate poston.

2 When depressng the ntermedate pedal, the

presser comes down to ts lower dead pont.

3 When the left lever s pressed wth the presser

at the bottom, sewng starts.

4 When re-depressng the rght

pedal n the state that the presser

s at the ntermedate poston, the

presser goes up to ts upper dead

pont.

5 When depressng the ntermed-

ate pedal agan n the state that

the presser s n the bottom pos-

ton, the presser goes up to the

top.

Table of Contents