Performing New Register Of Pattern Button - JUKI AMS-224E/IP-410 Instruction Manual

2-15. Performing new register of pattern button

A
E
B
D
C
Press P1 to P50 key while the sewing screen is displayed and the presser comes down.
Be careful that your fingers are not caught in the presser.
1 Display the data input screen.
Only n case of the data nput screen (blue), new regster of the
pattern button can be performed. In case of the sewng screen
(green), press READY swtch
screen (blue).
2 call the new register of pattern button screen.
Press NEW REGISTER button
of pattern button screen s dsplayed.
3 Input the pattern button No.
Input the pattern button No. you desre to newly regster wth
the ten keys B . New regster to the pattern button No. whch
has been already regstered s prohbted.
It s possble to retreve the pattern button No. whch has not
F
been regstered wth the "+" or "–" button
D ).
4 Select the folder to be stored.
It is possible for the pattern buttons to be stored in five folders.
As many as 10 pattern buttons can be stored for one folder.
The folder to store the button can be selected wth FOLDER
SELECTION button
5 Determine the pattern No.
Press ENTER button
No. to be newly regstered and the data nput screen at the
tme of pattern button selecton s dsplayed.
– 40 –
and dsplay the data nput
A and the new regster
E .
F to determne the pattern button
( C and