When PerformNg WNdNg BobbN Thread Only; Using Counter; SettNg Procedure Of The Counter - JUKI AMS-224E/IP-410 Instruction Manual

(2) When performing winding bobbin thread only

2-12. using counter

(1) Setting procedure of the counter
A
B
C
1 Display the bobbin winding screen.
Press BOBBIN WINDER button
A
screen (blue) and the presser comes down. Then the bobbn
wndng screen s dsplayed.
2 Start bobbin winding.
Depress the start pedal, and the sewng machne rotates and
starts wndng bobbn thread.
B
3 Stop the sewing machine.
Press STOP button
returns to the normal mode. Or, depress the start pedal agan
durng wndng bobbn and the sewng machne stops whle the
bobbn thread wndng mode stays as t s. Depress the start
pedal agan and the bobbn wndng starts agan. Use ths way
when wndng bobbn thread around plural bobbns.
Bobbin winder does not work immediately after turning
oFF the power or immediately after moving from the
main unit input.
Perform winding after setting pattern No. or the like
once, pressing the rEaDY key
the sewing screen.
1 Display the counter setting screen.
Press swtch and the COUNTER SETTING button
A s dsplayed on the screen. When ths button s pressed, the
counter settng screen s dsplayed.
2 Selection of kinds of counters
Ths sewng machne has two knds of counters, . e. , sewng
counter and No. of pcs. counter. Press SEWING COUNTER
KIND SELECTION button
LECTION button
screen. The knds of the respectve counters can be set sepa-
rately.
– 35 –
A n the data nput
B and the sewng machne stops and
, and displaying
B or NO. OF PCS. KIND SE-
C to dsplay the counter knd selecton