Changing Sewing Mode - JUKI AMS-224E/IP-410 Instruction Manual

B
D
G
E F

2-20. changing sewing mode

3 Select the pattern No. of copy source.
Select the pattern button No. of copy source from the pattern
button lst button B .
Next, press COPY DESTINATION INPUT button
the copy destnaton nput screen s dsplayed.
C
4 Input the pattern No. of copy destination.
Input the pattern button No. of copy destnaton wth ten keys D .
Pattern button No. whch s not used yet can be retreved wth
– and + buttons
In addton, the folder to be stored can be selected wth FOLD-
ER SELECTION button
5 Start copying.
When ENTER button
H
coped pattern button No. n the selecton state returns to the
pattern button copy (copy source selecton) screen after ap-
proxmately two seconds.
* Combnaton data can be coped n the same way.
1 Select the sewing mode.
When swtch s pressed n the state that the pattern has
been regstered, SEWING MODE SELECTION button
A
A s dsplayed on the screen. When ths button s pressed, the
sewng mode changes alternately the ndvdual sewng and
the combnaton sewng. (When the pattern button s not regs-
tered, the sewng mode cannot be changed to the combnaton
sewng even when the button s pressed.)
* The mage of the button of sewng mode selecton button
changes accordng to the sewng mode whch s selected at
present.
When ndvdual sewng s selected :
When combnaton sewng s selected :
– 49 –
( E and F ).
G .
H s pressed, copyng starts. The
C and