Table of Contents
Advertisement
A
C
D
F
J
(2) changing the intermediate presser height value
Press INTERMEDIATE PRESSER button
sewng screen to dsplay the ntermedate presser foot heght
reference value settng screen.
Press INTERMEDIATE PRESSER SELECTION button
B to dsplay the ntermedate presser heght ncrease/de-
crease value selecton screen.
B
When
C s pressed, the ntermedate presser heght
ncrease/decrease value selecton screen s dsplayed.
Wth
D or
or rear n the state that the presser s lowered.
Wth
F or
pont where there s the ntermedate presser command n
front or rear.
When you desre to stop, press STOP button
Press ORIGIN MOVE button
to the start of sewng poston.
E
The value whch s dsplayed s the absolute value (ntermedate
I
presser heght value + ntermedate presser ncrease/decrease
H
value).
G
Input the value you desre wth TEN keys and +/– keys J .
When ENTER button
mned.
1. When checking the needle, or performing the feed
forward or backward, the machine fails to work un-
less the presser is lowered. use the machine after
lowering the presser.
2. When increasing the height of intermediate presser
or making the needle size thicker, confirm the clear-
ance between the wiper and the components. Wiper
cannot be used unless the clearance is secured. In
K
this case, turn oFF the wiper switch, or change the
set value of memory switch u105.
– 31 –
E , needle moves by one sttch n front
G , needle moves to the needle entry
I and the needle moves
K s pressed, the data s deter-
A n the
H .
Advertisement
Table of Contents
