Table of Contents
Advertisement
No.
Feeding frame control : pedal open/close
Operaton order of feedng frame by pedal
operaton at the normal tme s set.
(At the tme of control by ar)
0 : Sold presser (Rght pedal)
1 : Rght/left separated presser (Wthout prorty of rght/left)
2 : Rght/left separated presser (In the order of rght to left)
3 : Rght/left separated presser (In the order of left to rght)
4 to 7 : Specal type (*1)
8 : Sold presser (Left pedal)
9 : Sold presser 2-step stroke
10 : Rght/left separated presser 2-step stroke (Wthout rght/left
separaton)
11 : Rght/left separated presser 2-step stroke (Order of rght to left)
12 : Rght/left separated presser 2-step stroke (Order of left to rght)
13 to 99 : Sold presser
*1 : When usng these tems, refer to Engneer's Manual.
* Settngs 9 to 12 are only enabled for the 2-step stroke type.
Feeding frame control : midway stop time open/close
Operaton order of feedng frame by pedal
operaton when lftng the feedng frame by the
temporary stop command n the pattern data s set.
(At the tme of control by ar)
0 : Sold presser (Rght pedal)
1 : Rght/left separated presser (Wthout prorty of rght/left)
2 : Rght/left separated presser (In the order of rght to left)
3 : Rght/left separated presser (In the order of left to rght)
4 to 7 : Specal type (*1)
8 : Sold presser (Left pedal)
9 : Sold presser 2-step stroke
10 : Rght/left separated presser 2-step stroke (Wthout rght/left
separaton)
11 : Rght/left separated presser 2-step stroke (Order of rght to left)
12 : Rght/left separated presser 2-step stroke (Order of left to rght)
13 to 99 : Sold presser
*1 : When usng these tems, refer to Engneer's Manual.
* Settngs 9 to 12 are only enabled for the 2-step stroke type.
Pedal SW1 with/without latch
Wthout
Pedal SW2 with/without latch
Wthout
Pedal SW3 with/without latch
Wthout
Pedal SW4 with/without latch
Wthout
Item
Wth
Wth
Wth
Wth
– 79 –
Setting range
Edit unit
0 to 99
1
0 to 99
1
---
---
---
---
---
---
---
---
Advertisement
Table of Contents
