Optional; Table Of Needle Hole Guide; Silicon Oil Tank - JUKI AMS-224E/IP-410 Instruction Manual

2. OPTIONAL

2-1. Table of Needle hole guide
Needle used
Size Part No.
#09 to #11 B242621000C
#11 to #14 B242621000A
#14 to #18 * B242621000B
1
B242621000D
#18 to #21
B242621000F
#22 to #25 * B242621000G
2
#18 to #25 B242621000H
Needle used
Size Part No.
#09 to #11
B1601210D0E (OP)
#11 to #14 40023632 (H type)
B1601210D0FA (OP)
#14 to #18 *
1
#18 to #21 B1601210D0BA (G type)
#22 to #25 *
2
B1601210D0CA (OP)
#18 to #25
* : H-type installed needle (DP X 17 #18)
1
* : G-type installed needle (DP x 17 #23)
2
・Light-weight to medium-weight materials : Applicable thread No. #80 to #20
・Medium-weight to heavy-weight materials : Applicable thread No. #50 to #02
・Heavy-weight to extra-heavy weight materials : Applicable thread No. #20 to #02
・(OP) means the optional.
2-2. Silicon oil tank
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
2
5
3
1
4
Needle hole guide
Needle hole diameter
ø 1.6
ø 1.6
ø 2.0
ø 2.4
ø 3.0
ø 3.0 (with a counterbore)
ø 3.0 (eccentric hole)
Intermediate presser
Size (øA × øB × H × L)
ø 1.6 × ø 2.6 × 5.7 × 37.0
ø 2.2 × ø 3.6 × 5.7 × 38.5
ø 2.2 × ø 3.6 × 8.7 × 41.5
ø 2.7 × ø 4.1 × 5.7 × 38.5
ø 3.5 × ø 5.5 × 5.7 × 38.5
The G type model is provided with silicon oil tank
asm. (40097301) as an accessory.
The silicon oil tank asm. should be fixed on the
sewing machine by means of setscrews 1 (SM-
6
4041055SP) and 2 (SM4042055SP) supplied
with the unit. To tighten setscrew 2 , tighten it
together with thread guide collar 3 (11315108),
silicon oil tank thread guide 4 (40010414) and
thread guide setscrew washer 5 (WP0501046SC).
Silicon oil tank thread guide 4 (40010414) should
be placed so that it is in parallel with silicon oil
tank base 6 (40096982).
– 105 –
Application
For knits (OP)
For light-weight to medium-weight materials
For medium-weight to heavy-weight materials (H type)
For heavy-weight materials (OP)
For heavy-weight materials (G type)
For extra heavy-weight materials (OP)
(supplied for G type)
For heavy-weight materials to prevent skip-stitching
(OP)
H
If the thread twists hard on silicon
oil tank base 6 (40096982), reverse
the direction of winding the thread.
ø A
L
ø B