Table of Contents
Advertisement
1-13. replenishing the designated places with grease
* Perform grease supplement when the errors below are displayed or once a year (either one
which is earlier).
D
1. Error code E220 or E221 is displayed again unless NuMBEr oF StItcHES D is
changed to "0" after replenishing the designated places with grease. When E221 is
displayed, the sewing machine fails to operate. So, be careful.
2. When GrEaSE aPPLYING PoSItIoN DISPLaY button
screen, the grease applying position can be confirmed in the panel display. Be sure,
however, to perform the grease applying after turning oFF the power.
When the sewng machne has been used for a certan
number of sttches, error "E220 Grease-up warnng" s
dsplayed. Ths dsplay nforms the operator of the tme of
replenshng the desgnated places wth grease. Be sure to
C
replensh the places wth the grease below. Then call the
memory swtch U245, press CLEAR button
set NUMBER OF STITCHES D to "0".
Even after the dsplay of the error "E220 Grease-up warn-
B
ng", when RESET key
leased, and the sewng machne can be contnuously used.
Afterwards, however, error code "E220 Grease-up warnng"
s dsplayed every tme the power s re-turnng ON.
In addton, when the sewng machne s used further for a
certan perod of tme wthout replenshng the places wth
grease after the dsplay of error No. E220, error "E221
C
Grease-up error" s dsplayed and the sewng machne fals
to operate snce the error cannot be released even when
the RESET key s pressed.
When error "E221 Grease-up error" s dsplayed, be sure to
replensh the desgnated places below wth grease. Then
B
call the memory swtch U245, press CLEAR button
A and set NUMBER OF STITCHES D to "0".
When RESET key
ng the desgnated places wth grease, error code "E221
Grease-up warnng" s dsplayed every tme the power s
re-turnng ON afterwards and the sewng machne fals to
operate. So, be careful.
A
C
– 101 –
B s pressed, the error s re-
B s pressed wthout replensh-
C is pressed in each
A and
Advertisement
Table of Contents
