JUKI AMS-224E/IP-410 Instruction Manual page 66

M
N
5 Start the count of number of pieces of production.
When START button
of peces of producton s started.
K
I
6 Stop the count.
Dsplay the producton control screen referrng to
"@-2-24.(3) observing the production control information"
p.60.
When the count s beng performed, STOP swtch
dsplayed. When STOP button
s stopped.
After the stop, START button
J
poston of STOP button. When contnung the count, press
START button
cleared untl CLEAR button
7 clear the counted value.
When clearng the counted value, set the count to the stop
state and press CLEAR button
The value to be cleared s the present target value M and ac-
L
tual results value N only.
* cLEar button is displayed only in case of stop state.
When CLEAR button
ton screen s dsplayed.
When CLEAR button
ton screen, the counted value s cleared.
O
– 62 –
I s pressed, the count of number
J s pressed, the count
I s dsplayed at the
I agan. The counted value s not
K s pressed.
L .
L is pressed, the clear confirma-
O is pressed in the clear confirma-
J s