Table of Contents
Advertisement
F
1. When turning oFF the power without pressing rEaDY key
tern No.", "X enlargement/reduction ratio", "Y enlargement/reduction ratio", "Max. sewing
speed", "thread tension" or "Intermediate presser height" is not stored in memory.
2. When operation processing cannot be performed since the reduction ratio is excessively
small, E045 Pattern data error is displayed.
3. When the scale rate is changed with increase/decrease of number of stitches (pitch is
fixed), mechanical control command inputted to the points other than the shape point is
deleted.
H
For example, nput X scale rate.
Press
A to dsplay the tem data nput screen.
3 Input the data.
Input the value you desre wth ten keys and + / – keys F .
4 Determine the data.
When ENTER button
mned.
*
For the other item data, the data can be changed by the
G
same operation.
*
X/Y scale rate or X/Y actual size value can be inputted in
one screen.
When X/Y enlargement/reducton rato, addng/deletng of thread
tenson command, addng/deletng of ncrease/decrease value of
ntermedate presser of users' pattern, or X/Y enlargement/reduc-
ton rato, addng/deletng of thread tenson, ntermedate presser or
thread tenson command, or addng/deletng of ncrease/decrease
value of ntermedate presser of meda pattern s performed, the
pattern knd secton becomes change dsplay H .
In case of change dsplay H , the change confirmation screen is
dsplayed at the tme of the change of pattern.
When ENTER button
current pattern s nvaldated and the pattern No. s changed.
To store the changed pattern, refer to
register of users' pattern"
I
– 28 –
G s pressed, the data s deter-
, the set value of "Pat-
I s pressed, the nformaton on the
"@-2-13. Performing new
p.38.
Advertisement
Table of Contents
