Register State At The Time Of Your Purchase - JUKI IP-310/ACF-172-1790 Instruction Manual

3 Select the sewing data to be registered.
Select the sewing data you desire to register with
the sewing data buttons (C). When the selected
button is pressed twice, the selection is released.
4 Register to the customize button.
When ENTER button
register to the customize button is finished and
the customize button register screen is displayed.
The registered sewing data is displayed on the
customize button.

2-12-2. Register state at the time of your purchase

The following sewing data have been registered in order from the left hand at the time of your purchase.
Pitch at parallel section
Compensation of bar-tacking width, left
Compensation of bar-tacking width, right
Setting of needle thread tension at the start of sewing
(D) is pressed,
−  −
C
D