Inputting The Inspection Time - JUKI LK-1900B/IP-420 Instruction Manual

27-2 Inputting the inspection time

① Display the information screen (maintenance
personnel level).
When information key
section is pressed in the data input screen for
approximately three seconds, information screen
(maintenance personnel level) is displayed.
In case of the maintenance personnel level,
the pictograph located on the upper left side
changes from blue to orange, and five buttons
are displayed.
② Display the maintenance information screen.
Press maintenance inspection information screen
B in the information screen.
display button
* For the two buttons displayed in the bottom stage
at the time of the maintenance personnel level,
refer to "36. INFORMATION SCREEN OF THE
MAINTENANCE PERSONNEL LEVEL" p.138
The same information as that in the normal
maintenance inspection information screen
is displayed in the maintenance inspection
information screen.
When button C of the item you desire to change
the inspection time is pressed, the inspection time
input screen is displayed.
A of the switch seat
.
– 96 –
A
B
C