Information Function - JUKI AMB-289 Instruction Manual

42. INFORMATION FUNCTION

There are three functions below in the information function.
1) Oil replacement (grease-up) time, needle replacement time, cleaning time, etc. can be specified
and the warning notice can be performed after the lapse of the specified time.
"42. (1) Observing the maintenance and inspection information"
Refer to
"42. (2) Inputting the maintenance and inspection
2) Speed can be checked at a glance and the target achieving consciousness as a line or group is
increased as well by the function to display the target output and the actual output.
"42. (4) Observing the production control information"
Refer to
setting of the production control
3) Information on machine working ratio, pitch time, machine time and machine speed can be
displayed from the working state of the sewing machine.
"42. (6) Observing the working measurement
Refer to
In addition, information on plural sewing machines can be controlled by the server when this function
is used by connecting SU-1 (sewing machine data server utility) with the sewing machines.
LK–1900A
time".
information".
information".
SU–1
LBH–1790
@– 99
and
"42. (5) Performing
and
LZ–2290A