Table of Contents
Advertisement
Function of operational buttons
Needle up/down button
When machine stops, press this button to change
the needle position. (When the needle is up, the
needle moves down and vise versa.)
The sewing machine performs sewing at a low
speed by keeping this button held pressed for a
long time.
* The needle will not move when the presser foot
is in its upper position or no pattern is selected.
Thread trimming button
After sewing, press this button to trim
both threads automatically.
Notes for thread trimming:
1. Do not use thread thicker than No.30.
2. After trimming, the stitch can be done without pulling up bobbin thread.
3. When sewing again after thread trimming, if you pull up the bobbin thread again and place it under-
neath the presser foot together with needle thread, you can avoid birds nest on the wrong side of the
fabric.
4. Regularly clean the machine (refer to page 111), as dust in the area of the thread trimming unit may
cause malfunction.
Lock stitch button
When this button is pressed, the sewing machine
performs lock stitch.
When this button is pressed while the sewing ma-
chine is engaged in pattern sewing, the sewing ma-
chine stops after it has completed the sewing of the
one-cycle/one-point of the pattern.
Reverse stitch button
For straight stitch/zigzag stitch: The sewing machine performs
For other stitch types: The sewing machine performs lock
Start/stop button
When pressing this button, machine starts to sew slowly and then
up to the speed set by speed controller. Another press of this button
stops the sewing machine.
Color of button indicates machine status.
Green: Ready to start and/or while sewing
Red:
Not ready to start
Orange: When the lock stitch button is pressed while the sewing
machine is engaged in pattern sewing (The sewing ma-
chine performs lock stitch after it has completed the sew-
ing of the pattern by one cycle. Then, the sewing machine
stops.)
Presser foot auto lift button
When this button is pressed while the
sewing machine is at rest, the presser
foot position is changed.
When the presser foot is in its upper po-
sition, it comes down to its lower position
and vice versa.
Speed controller
While sewing, speed can be adjusted.
reverse stitch as long as this button is
held pressed.
stitch.
9
Advertisement
Table of Contents
