Performing Formatting Of The Media - JUKI AMS-220EN / IP-420 Instruction Manual

2-28. Performing formatting of the media

To re-format a medium, the IP-420 has to be used. The IP-420 is not able to read any medium which is
formatted on a personal computer.
A
① Display the media format screen.
When switch is held pressed for three seconds, MEDIA
FORMAT button
this button is pressed, the media format screen is displayed.
② Start formatting of the media.
Set the media you desire to format to the media slot, close
the cover, press ENTER button
Save necessary data in the media to the other media before
formatting. When formatting is performed, the inside data are
deleted.
When two or more media are connected to the sewing
B
machine, the medium to be formatted is determined by
the predetermined priority order.
High
CF(TM) slot
When a CompactFlash (TM) is inserted in the CF(TM)
slot, the CompactFlash (TM) will be formatted accord-
ing to the priority order as shown above.
Refer to the USB specifications for the priority order of
access.
– 90 –
A is displayed on the screen. When
B and formatting starts.
Low
→
USB device 1 USB device 2
→ →
....
→