Performing Formatting Of The Smart Media - JUKI AMS-210E-1306 Instruction Manual

2-26. Performing formatting of the smart media

When re-formatting the smart media, be sure to perform it with IP-400. The smart media that is
formatted with the personal computer cannot be read with IP-400 and the CP-20.
A
1 Display the smart media format screen.
When MODE key
smart media format button
When this button is pressed, the smart media format screen is
displayed.
2 Start formating of the smart media.
Set the smart media you desire to format to the smart media
slot, close the cover, press ENTER button
formating starts.
Save necessary data in the smart media to the other vehicle
before formating. When formating is performed, the inside
data are deleted.
B
– 77 –
is held pressed for three seconds,
A is displayed on the screen.
B and