Operations After Uninstalling - Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual

Chapter 7 Operation End
7.2 VSSHP Uninstallation
7.2.1

Operations After Uninstalling

Perform the following after uninstalling.
■
Change the firewall settings (Only the backup server)
Set the port number that was used for the firewall target again.
For the procedure for changing the settings of the firewall, refer to the help for each firewall.
51
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0