Installation Considerations; High-Altitude Operation; Mounting The Plasmawall On A Wall Or Table Stand - Runco PLASMAWALL XP-65DHD Owner's Operating Manual

High definition, 1080p flat panel plasma display with widevision
Hide thumbs Also See for PLASMAWALL XP-65DHD:
Table of Contents

Advertisement

Installation
3.3
Installation
Considerations

High-Altitude Operation

Mounting the PlasmaWall
on a Wall or Table Stand
Proper installation of your PlasmaWall will ensure the highest possible picture quality.
Whether you are installing the PlasmaWall temporarily or permanently, you should take the
following into account to ensure that it performs optimally.
Due to the design of all plasma glass panels made by every manufacturer, and the
interaction between ambient air pressure and the plasma gases contained inside of the
panel, reliable operation of your plasma display cannot be assured during operation at
certain high-altitude locations.
Runco has found the XP-65DHD to operate reliably at altitudes of up to 6000 MSL (mean
sea level). The XP-65DHDxa has been found to operate reliably at altitudes of up to 9000
MSL.
At higher elevations, each panel may react differently, depending upon the altitude, air
pressure, humidity and other meteorological factors. If you are planning to use this
product at a location above 9000 feet, please contact Runco technical support for further
information.
To install the PlasmaWall, you will need either an optional table stand or wall-mounting kit.
The PlasmaWall cannot be installed on its own.
If you do decide to wall-mount the PlasmaWall, ensure that the wall-mount bracket is
installed according to the instructions included with it. The wall must be capable of
supporting a redundant weight factor three (3) times the weight of the display, or be
reinforced.
Runco recommends that this be done by a custom installation specialist.
Note
You can attach your optional mounts or stand to the PlasmaWall in either of two ways:
• While it is upright.
Use only a Runco-approved wall-mount kit (Runco part number
RUHK-005075 or equivalent) or table stand that is specifically
designed for your display.
16
PlasmaWall XP-65DHD Owner's Operating Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plasmawall xp-65dhdxa

Table of Contents