Rs-232 Controller Connection; Rs-232 Control System Connection - Runco CinemaWall SP-42xa Owner's Operating Manual

Use a 9-pin, straight-through RS-232 cable to connect a PC or home theater
control/automation system (if present) to the RS-232 port (located next to INPUT 5) on the
CinemaWall; see Figure 3-13.
For more information about using this connection, refer to Serial Communications on
page 53.
XMT DATA
3
RCV DATA
To/From
2
PC or
Control
SIG GND
5
System
1, 4, 6, 7, 8, 9
DB-9 Female
Figure 3-13. RS-232 Control System Connection
Runco CinemaWall SP Series Owner's Operating Manual
RCV DATA
XMT DATA
SIG GND
NO CONNECTION
DB-9 Male
3
CinemaWall
2
RS-232
5
1, 4, 6, 7, 8, 9
25
RS-232 Controller
Connection
DVI VIDEO
Installation