I Am/Fm Narrow Mode - Icom IC-2725E Instruction Manual

11
OTHER FUNCTIONS

I AM/FM narrow mode [

The IC-2725E has AM mode reception for both the left and
right bands, and FM narrow mode is available for the left
band.
qSelect the desired frequency band in VFO mode, or the de-
sired memory channel on the left or right band as desired.
• If you want to select FM narrow mode, select the desired fre-
quency band or memory channel on the left band.
w Push [SET•
] to enter set mode.
e Push [SET•
] or [LOW•PRIO] to select "nAr" item or
"COn" item.
• Select "nAr" for Wide/Narrow setting.
• Select "COn" for operating mode setting.
• Wide/Narrow setting
MAIN
T X
M
r Rotate the same band's [DIAL] to select FM narrow or AM
as desired.
• "AM" appears when AM mode is selected.
t Push [TONE•DTMF] to exit set mode.
63
• Operating mode setting
MAIN
T X
M
z Push [BAND] to select the desired band (left or
SET
right) as the main band.
B
• If you want to select FM narrow mode, select the de-
sired frequency band or memory channel on the left
band.
x Set the desired frequency or memory channel.
c Push [
B(D-OFF)] to enter set mode.
SET
v Push [
B(D-OFF)] or [
SET
"nAr" item or "COn" item.
• Select "nAr" for Wide/Narrow setting.
• Select "COn" for operating mode setting.
b Push [Y]/[Z] to select FM narrow or AM as de-
sired.
n Push [
A(MW)] to exit set mode.
CLR
C(T-OFF)] to select
ENT