Panel Description; I Front Panel- Controller - Icom IC-2725E Instruction Manual

1

PANEL DESCRIPTION

I Front panel— controller
*The switches w to t are
for the MAIN band only.
q POWER SWITCH [PWR]
Turns power ON and OFF when pushed for 1 sec.
w SET•LOCK SWITCH [SET•
➥ Enters set mode when pushed. (p. 55)
➥ Switches the lock function ON and OFF when pushed
for 1 sec. (p. 15)
e OUTPUT POWER•PRIORITY SWITCH [LOW•PRIO]
➥ Each push changes the output power selection. (p. 20)
➥ Starts priority watch when pushed for 1 sec. (p. 46)
1
q
Function display (pgs. 3, 4)
PWR
MAIN
BAND
DUP T SQL
MAIN
T X
V/MHz
SCAN
M/CALL LOWMID
BUSY M
MW
SKIP
VOL
DUAL BAND FM TRANSCEIVER
DIAL
SQL
DUP
MONI
t
]
SET
DTCS DUP T SQL DTCS
MAIN
AM AM
T X
LOWMID
BUSY M
SKIP
VOL
i2725
SQL
TONE LOW
DTMF PRIO
r e
r TONE•DTMF SWITCH [TONE•DTMF]
➥ Each push selects a tone function. (pgs. 23, 51)
• Subaudible tone encoder, pocket beep (CTCSS), tone
squelch, pocket beep (DTCS), DTCS squelch or tone func-
tion OFF can be selected.
➥ Turns DTMF memory encoder ON and OFF when
pushed for 1 sec. (p. 47)
t DUPLEX•MONITOR SWITCH [DUP•MONI]
➥ Push to select DUP–, DUP+ and simplex operation.
(p. 23)
➥ Push for 1 sec. to switch the monitor function ON and
OFF. (p. 16)
w
MAIN
BAND
V/MHz
SCAN
M/CALL
MW
DIAL