Icom IC-2725E Instruction Manual page 78

11
OTHER FUNCTIONS
D D Packet operation band
Selects the packet operation band from auto, right and left.
• Auto (At)
• Left (L)/Right (r) : The selected left or right band can
MAIN
T X
D D Squelch delay
Selects squelch delay from short and long to prevent re-
peated opening and closing of the squelch during reception
of the same signal.
• S : Short squelch delay. (default)
• L : Long squelch delay
MAIN
T X
D D Microphone sensitivity
Selects the microphone sensitivity from high (H) and low (L)
to suits your preference.
MAIN
T X
61
: The main band is used for packet op-
eration.
only be operated for packet.
MAIN
T X
M M
MAIN
T X
M M
MAIN
T X
M M
D D Squelch attenuator
Turns the squelch attenuator function ON and OFF.
• ON : The squelch attenuator activates when [SQL]
control is set between 12 o'clock and fully
clockwise position. (default)
• OF : The squelch attenuator does not function.
MAIN
T X
M
D D Active band
Selects the frequency selecting condition via [DIAL] or [Y]/[Z]
on the microphone from all (AL) and single (SI).
• All (AL) : The operating frequency can be selected
continuously. (default)
• Single (SI) : The operating frequency can be selected
within the
[MAIN•BAND] for 1 sec. then tuning dial rota-
tion is necessary for frequency band selection.
MAIN
T X
M
MAIN
T X
M
current band. Pushing
MAIN
T X
M