Mounting Hardware Kit Contents; Installation - Qlogic 12000 Installation Manual

Installation

12800-040 Installation
12800-040 Installation
NOTE:
The following procedures are for installing the switch using variable
distances between the front and rear rack posts.

Mounting Hardware Kit Contents:

NOTE:
The mounting kit contains all of the necessary parts for installing and
mounting the switch into a 19" 4-post server rack, with a distance between
front and rear rack posts ranging from 28" - 33" (711mm - 838mm).
• Support Rails
• HAT Brackets
• C-Brackets
• #8-32 Flat Head Screws
• M6 Mounting Screws
• M6 Clip Nuts
1-12
S
D000140-001 B