Qlogic 12000 Installation Manual page 54

Installation
12800-360 Installation
12. Attach the cable management guides.
If applicable, attach the cable management guides to the front and rear EIA
mounting rails, and fasten with M6 screws to the pre-installed clip nuts. The
guides should be installed such that the wireframe supports line up with the
chassis leaf module slots. There are four (4) guides in the front of a rack and
four (4) in the rear of a rack.
Figure 1-38 Attaching Cable Management Guides
13. If applicable, replace the door(s) on the rack.
1-46
S
D000140-001 B