A
Spine Module Replacement
FRU part number:
Single Spine Module: 12800-SPSG01
Double Spine Module: 12800-SPDB01
Removal Procedures
1.
Pull the release arms out until the spine module disengages from the
backplane connector.
2.
Carefully pull the module out of the chassis.
Replacement Procedures
1.
Slide the module straight into the open slot until it engages with the
backplane connector.
2.
Push the arm up until they lock in place.
3.
Make sure the module is operating and the Status LED(s) is green.
D000140-001 B
Figure D-7
12800 Spine Removal
.
FRU Replacement
QLogic 12800 Series
D-9