Qlogic 12000 Installation Manual page 62

Installation
Bringing Up the System For the First Time
are from the same manufacturer, as well as the same length.
5. After reinserting the cables, bring up Chassis Viewer. The 8X ports are
displayed as shown in
on.
6. From the Chassis Viewer main menu, click on Port Stats then IB Port Stats
to display the IB Port Statistics screen. The 8X port (for DUO of cable ports
10 and 28) is displayed as shown in
The first port of the group (port 10) is shown as active and Up, while the other
port in the DUO (port 28) is displayed as down and Disabled.
1-54
Figure 1-42
Figure 1-42 8X Ports Enabled
Figure 1-43 8X Port Statistics
where both ports of the DUO have LEDs
Figure 1-43:
S
D000140-001 B