A
Leaf Module Replacement
FRU part number:
18 Port Leaf: 12800-LF18
24 Port Leaf: 12800-LF24
Removal Procedures
NOTE:
If the leaf module is in one of the chassis management slots, the mechanical
release latch (MRL) must be moved in order to remove the leaf. To move the
MRL, loosen the thumbscrew attached to the the Serial, Ethernet, Chassis
EEPROM Board (SEEB) module, then slide the MRL to the left. This allows
enough clearance for leaf release arm.
D000140-001 B
Figure D-5
MRL
.
FRU Replacement
QLogic 12800 Series
D-7