Mark The Rack - Qlogic 12000 Installation Manual

Installation
Installation Tasks Checklist
It is recommended that cabinet anti-tip devices are used. This is especially true if
installing or removing a switch in the upper half of the cabinet when the lower half
is empty.

Mark the Rack

Allow enough vertical space in the rack for each specific switch installation.
1. Determine the location in the rack of the bottom of the switch.
2. Mark the upper (if applicable) and lower mounting positions on the vertical rails
on the front of the rack.
3. Mark the upper (if applicable) and lower mounting positions on the vertical rails
on the back of the rack.
1-6
S
D000140-001 B