Using Sansurfer Switch Manager Workstation Requirements; Installing The Management Application; Workstation Requirements - Qlogic SANbox 5200 Series User Manual

2 – Using SANsurfer Switch Manager

Workstation Requirements

2.1
Workstation Requirements
The requirements for fabric management workstations running SANsurfer Switch
Manager are described in
Operating System
Memory
Disk Space
Processor
Hardware
Internet Browser
Telnet workstations require an RJ-45 Ethernet port or an RS-232 serial port and
an operating system with a Telnet client.
2.2

Installing the Management Application

You can manage the switch using SANsurfer Switch Manager as a standalone
application or as a part of SANsurfer Management Suite™. SANsurfer
Management Suite is QLogic's integrated fabric management application,
managing both HBAs and switches.
If your switch was shipped with a SANsurfer Switch Manager Disk, refer to
"SANsurfer Switch Manager" on page 2-3
SANsurfer Switch Manager.
If your switch was shipped with a SANsurfer Management Suite Disk, refer
to
install and upgrade SANsurfer Management Suite.
2-2
Table
Table 2-1. Workstation Requirements
Windows® 2000, 2003, and XP
Solaris™ 8, 9, and 10
Linux® Red Hat® EL 3.x
S.u.S.E® Linux 9.0 Enterprise
Mac OS X® 10.3
256 MB or more
150 MB per installation
500 MHz or faster
CD-ROM drive,
Microsoft® Internet Explorer® 5.0 and later
Netscape® Navigator® 4.72 and later
Mozilla™ 1.02 and later
Java 2 Run Time Environment to support the web applet
"SANsurfer Management Suite" on page 2-4
2-1:
RJ-45
Ethernet port, RS-232 serial port (optional)
for instructions on how to install
for instructions on how to
A
59056-03 C