Managing Drive Scsi Cables - HP StorageWorks ESL E Series Unpacking And Installation Manual

10100
Figure 27 Managing drive SCSI cables
CAUTION:
When routing cables through the cable access holes, be careful not to
dislodge or damage the I C cable attached to the cluster controller card.
2
c. Continue routing the cable up through the cable restraint bracket located
to the right of the card cage and attach the cable to the corresponding
SCSI port on the e2400-160 interface controller.
NOTE:
Tighten the SCSI connector screw on the left and then the right for easier
installation due to cable interference. Pull the cable toward you to provide
more clearance when tightening the right connector screw.
47
HP StorageWorks ESL E-Series Tape Library unpacking and installation guide