Storage Server Web User Interface - HP StorageWorks X5000 Release Note

Issue:
HP WebUI and other HTTP requests fail with the message Service Unavailable
Description
Workaround
Issue:
Telnet service fails to start after uninstallation of Microsoft Windows Server 2003 Service Pack 1
Description
Workaround

Storage server Web User Interface

This section provides additional information on using the WebUI.
Issue:
iLO settings on the ML310 G3 Storage Server cannot be updated properly through the WebUI
Description
Workaround Do the following:
Issue:
NetWare file sharing protocol's name is missing or displayed as 4035007D in the WebUI
Description
Workaround On the WebUI, go to the HP Utilities tab and select File and Print Service for
Issue:
DFS properties related to a share on WebUI are not displayed after changing the host name
Microsoft Windows Server 2003 Service Pack 1
On certain ProLiant Storage Servers, if Microsoft Windows Server 2003 Service
Pack 1 is uninstalled, the IIS web server service W3SVC fails to serve HTTP
requests, generating the following message in the event log: Application
Pool DefaultAppPool is being disabled due to a series of
failures in the process(es) serving that application pool.
The issue is currently under investigation.
Install Microsoft Windows Server 2003 Service Pack 1 again on the systems
where the problem is seen.
On certain storage servers, if Microsoft Windows Server 2003 Service Pack 1 is
uninstalled, the Telnet service fails to start up. The following message is displayed
when the service is started from Service Control Manager: Could not start
the Telnet service on Local Computer.
This issue is currently under investigation.
is invalid.
Reconfigure the logon credentials of the Telnet service. To do this:
1.
Select Telnet service from the Service Control Manager window.
2. Right-click and choose Properties.
3. In the Log On tab, change credentials to Local System Account.
4.
Restart the service.
Storage server Web User Interface
Using the HP ProLiant ML310 G3 Storage Server WebUI, iLO features like new
user creation and WINS server settings fail to configure. To access iLO settings
from the WebUI, select the Network tab and choose iLO Settings.
1.
From the command prompt, stop the Web services by using the command
net stop w3svc.
2. Re-run the Service Release 5.6 installation, and re-install the HP WebUI.
3. After installation, reboot the system.
If you configure the File and Print Service for NetWare after installing Microsoft
Windows Server 2003 Service Pack 1, the WebUI does not report the NetWare
protocol or the NetWare protocol label is displayed as 4035007D (under Shares >
Sharing Protocols page).
NetWare to manage NetWare file shares.
Storage Server with Windows Storage Server 2003 SP1 release notes
Error 13: the data
11