Create Virtual Library Wizard Window (8 Of 12) - HP StorageWorks 9000 - Virtual Library System User Manual

1. If you are already in the Create Library Wizard window, select Create Cartridges.
The Cartridge Parameters window opens
2. If not:
a. Click the System tab.
b. Select the virtual library in the navigation tree to which you are adding cartridges.
c. Click Create Cartridge in the task bar.
The Cartridge Parameters window opens
Figure 56 Create Virtual Library Wizard window (8 of 12)
.
3. To add a barcode template:
a. Enter the barcode prefix (one to five alpha characters) in the Barcode Prefix box.
b. Enter the number of digits for the barcode number in the Digit Length box.
c. Enter the barcode suffix (one to two alpha characters) in the Barcode Suffix box.
d. Enter the starting barcode number in the Starting # box.
e. Click Add to add the new barcode template.
f. To add another barcode template, repeat these steps.
4. Click the radio button next to the barcode template you want to use to create the cartridges.
NOTE:
Select a six character (or less) barcode number if your backup application is Veritas
Netbackup. Veritas Netbackup has a six character barcode number limit.
5. Click Next Step.
6. Select the type of physical cartridge to emulate
174 Configuration
(Figure 56).
(Figure 56).
(Figure 57).