Setting The Global Lan/Wan Replication Target Configuration Settings; Editing A Lan/Wan Replication Target; Setting The Global Lan/Wan Replication Target Settings - HP StorageWorks 9000 - Virtual Library System User Manual

Setting the Global LAN/WAN Replication Target Configuration Settings

1. Select the Automigration/Replication tab.
2. Select LAN/WAN Replication Targets from the navigation pane.
The Summary for All LAN/WAN Replication Targets screen displays all LAN/WAN replication
targets for all libraries.
3. Select Global LAN/WAN Replication Target Settings from the task bar.
The Global LAN/WAN Replication Target Configuration Settings screen displays. See
Figure 34 Setting the global LAN/WAN replication target settings
.
4. In the Maximum MB/s per Active LAN/WAN Replication Transfer field, leave it set to Unlimited
or select the empty field and enter the total number of transfers that you will allow at one time.
5. From the Default Compression Setting for LAN/WAN Replication Targets pull-down field, select
whether the compression for LAN/WAN replication targets is on (Yes) or off (No) by default.
6. Enter a new port number for unencrypted data transfer only if you need to change it from the
default.
Your firewall may require that the data transfer use a different port number.
7. Select Submit.

Editing a LAN/WAN Replication Target

To edit the LAN/WAN replication target settings:
1. Select the Automigration/Replication tab.
2. Expand LAN/WAN Replication Targets on the navigation pane, and then select the target of
interest. The LAN/WAN Replication Target Details screen displays.
3. Select Edit from the task bar.
4. On the Edit LAN/WAN Replication Target Settings screen, edit the target settings as needed.
5. Select Submit.
To edit the slot mapping, see
To edit the availability window:
118 Automigration/Replication
"Changing the Slot Mapping for a LAN/WAN
Figure 34.
Library" on page 102.