Editing The San Or Lan/Wan Policy; Editing The San Or Lan/Wan Availability Windows; Deleting A Copy Pool; San Destination Library Operations - HP StorageWorks 9000 - Virtual Library System User Manual

Editing the SAN or LAN/WAN Policy

1. Select Copy Pools in the appropriate library from the navigation pane.
2. Select the appropriate copy pool to open the Echo Copy Details screen.
3. In the task bar, select Edit Policy.
4. Make the appropriate changes. For explanations of the options, see
5. Select Submit.
The Echo Copy Details screen displays the new policy information.

Editing the SAN or LAN/WAN Availability Windows

1. Select Copy Pools in the appropriate library from the navigation pane.
2. Select the appropriate copy pool to open the Echo Copy Details screen.
3. In the task bar, select Edit Policy.
4. In the task bar, select Edit Policy Windows.
5. Make the appropriate changes. For explanations of the procedure, see
6. Select Submit.
The Echo Copy Details screen displays the new policy information.
To add or delete policy windows, see .

Deleting a Copy Pool

You should delete a copy pool when you no longer need it. To delete a copy pool:
1. Select Copy Pools under the appropriate library from the navigation pane.
2. Select the copy pool on the Summary for Copy Pools screen to open the Echo Copy Details screen.
3. From the task bar, select Delete.
4. Select OK from the dialog box.
The Copy Pools screen is refreshed and the deleted pool is no longer listed.
NOTE:
Deleting a copy pool moves the associated virtual tapes into the firesafe. At the end of the retention
period, the system deletes the source cartridges from the firesafe. If you need to retrieve the cartridges
for any reason, you must do so before the retention period ends.

SAN Destination Library Operations

This section describe all of the SAN destination library operations available to the user.
Figure 29.
Figure 30.
HP StorageWorks 103