Default Setting (System Menu)
Adjustment/Maintenance
Adjust printing quality and conduct machine maintenance.
•
Copy Density Adjustment ...8-54
•
Send/Box Density Adjust ...8-55
•
Drum Refresh ...8-55
•
Correcting Fine Black Lines ...8-55
•
System Initialization ...8-56
•
Display Brightness ...8-56
•
Silent Mode ...8-57
•
Auto Color Correction...8-58
•
Color Registration...8-58
•
Color Calibration Cycle...8-61
•
Gray Adjustment...8-62
•
Color Calibration...8-64
•
Developer Refresh...8-64
•
Laser Scanner Cleaning...8-64
•
MP Tray Cleaning...8-65
•
First Print Position...8-65
NOTE:
If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Copy Density Adjustment
Adjust copy density. Adjustment can be made in 7 levels both in auto and manual density modes.
Use the procedure below to adjust the copy density.
8-54
1
Press the System Menu key.
2
Press [
], [Adjustment/Maintenance] and [Next] of
Copy Density Adjustment.
3
Press [Change] of Auto or of Manual.
4
Press [-3] - [+3] (Lighter-Darker) to adjust density.
5
Press [OK].
OPERATION GUIDE