Kyocera TASKalfa 250ci Operation Manual page 289

Zoom
Select the enlarged/reduced default when paper size/sending size changed after the originals set. The available
default settings are shown below.
100%
Auto
Use the procedure below to select the default zoom setting.
File Name Entry
Set an automatically entered name (default) for jobs. Additional information such as Date and Time and Job No.
can also be set.
NOTE:
Refer to page 4-49 and page 5-28 for name entry.
Use the procedure below to set the default file name.
OPERATION GUIDE
Item
Copy (send/save) at actual size (100%).
Automatically reduce or enlarge the
originals to match paper size/ sending size.
Default Setting (System Menu)
Description
1
Press the System Menu key.
2
Press [Common Settings], [
Defaults, [ ] and then [Change] of Zoom.
3
Select the default zoom setting.
4
Press [OK].
1
Press the System Menu key.
2
Press [Common Settings], [
Defaults, [ ] and then [Change] of File Name
Entry.
3
Press [File Name] to enter the file name in not more
than 32 characters.
NOTE:
Refer to the Character Entry Method on
Appendix-7 for details on entering characters.
4
Press [OK].
5
Press [Date and Time] to add the date/time to the
job, or press [Job No.] to add the job number to the
job. The added information will be displayed in
Additional Info.
6
Press [OK].
], [Next] of Function
8
], [Next] of Function
8-25