Kyocera TASKalfa 250ci Operation Manual page 415

User Login/Job Accounting - User Login
User login administration.
Select authentication method.
Off
Host Name
Local
Authentication
Domain Name
Network
Authentication
Expansion
Server Type
Authentication
NTLM
Status
Login/Logout
Once you enable user login administration, a login user name and password entry screen appears each time
you use this machine.
Login
Use the procedure below to login.
Enter login user name and password.
Login to: Local
Login
abcdef
User Name
Login
********
Password
Check Counter
Status
OPERATION GUIDE
5
# Keys
Kerberos
Cancel OK
NOTE:
10/10/2008 10:10
rejected, check the following settings.
•
•
•
If you cannot login because of the setting of the
machine, login with any administrator registered in the
local user list and correct the settings.
If the server type is [Kerberos], only domain names
entered in uppercase will be recognized.
6
1
# Keys
# Keys
IC Card
Login
Login
Cancel
10/10/2008 10:10
2
NOTE:
Appendix-7 for details on entering characters.
Select [Local Authentication] or [Network
Authentication]. Select [Off] to disable user login
administration.
If you select [Network Authentication], enter the
host name (62 characters or less) and domain
name (256 characters or less) for the
Authentication Server. Select [NTLM] or [Kerberos]
as the server type.
If the login user name and password are
Network Authentication setting of the machine
User property of the Authentication Server
Date and time setting of the machine and the
Authentication Server
Press [OK].
If the screen below appears during the operations,
press [Login User Name].
Press [# Keys] to enter the login data using the
numeric keys.
Enter the login user name and press [OK].
Refer to the Character Entry Method on
Management
11
11-3