Page Numbering - Kyocera TASKalfa 250ci Operation Manual

Copying Functions

Page Numbering

Number multiple pages of originals in sequential order. The formats for numbering are [-1-], [P.1] or [1/n]. The
format [1/n] prints the total number of pages in the place of n.
Select Top Left, Top Middle, Top Right, Bottom Left, Bottom Middle or Bottom Right as the page numbering
position.
Use the procedure below to insert page numbers on your copies.
Ready to copy.
Page #
None Position
Top
Left
-1-
Bottom
Left
P.1
1st Page (1 - 10)
1
1/n
# Keys
Status
4-34
Original
Copies
Auto
Top Top
Last Page
Middle
Right
Bottom Bottom
Auto
Middle Right
Denominator
Start #
(1 - 999)
#
1
Top Edge Top
Original
Orientation
# Keys
Cancel OK
10/10/2008
[ – 1 –]
1
Press the Copy key.
2
Place the originals in the document processor or on
the platen.
3
Press [Layout/Edit] and then [Page #].
4
Select the numbering format from [-1-], [P.1] or
[1/n].
10:10
5
Select the page numbering position.
6
To start page numbering from a page other than the
first page, press [+] or [–] of 1st Page and select the
starting page. You can also enter the number with
the numeric keys after pressing [# Keys].
7
To start the numbering with a number other than 1,
press [+] or [–] of Start Number and enter the
starting number. You can also enter the number
with the numeric keys after pressing [# Keys].
[P.1] [1/n]
OPERATION GUIDE